Fiberglass columns offer an affordable alternative to structural or decorative stone or masonry columns. They hold paint well, are easy to paint and stand up to a variety of conditions and abuse. Available in a variety of designs and finishes, they can be coordinated to match any decor, interior or exterior.
Instructions
1. Clean the column of any dust or dirt by wiping it down with a damp cloth. Dirty areas may need to be cleaned using a solution of water and soap and then rinsed with clean water. Allow the column to dry before continuing on
2. Caulk the joints between the caps and the column and the base and the column. If the gaps are large, insert a foam backer rod to fill most of the space and caulk on top of this. These rods are available at most hardware and home improvement stores and are designed to fill large cracks before caulking them. Let the caulking dry and apply another coat if needed. It is best to apply smaller beads of caulking to minimize the risk of the caulking shrinking and pulling away from the edges as it dries.
3. Use a 3-inch paintbrush to apply a coat of primer to the columns. The primer should be chosen according to location (interior/exterior) and type of paint to be used (oil/latex and flat/gloss). Check with your local paint store for the right primer for your particular combination of factors. In general, an exterior latex semigloss paint will require an exterior latex primer designed for gloss paints. You can substitute oil for latex, interior for exterior, and flat for gloss in the formula to get the right kind of primer, but it is best to consult your local paint store.
4. Lightly sand the primer coat with 220-grit sandpaper and wipe the sanding dust off with a rag soaked in denatured alcohol.
5. Apply the first coat of paint to the columns using a 3-inch paintbrush. Start painting at the top and work your way to the bottom. Dip at least half of the brush in the paint can and remove the excess paint on one side of the brush by wiping it against the can.
6. Allow the paint to dry and sand the first coat using 400-grit sandpaper and remove the sanding dust like before.
7. Apply the second and final coat of paint, painting just like in Step 5. You may lightly sand it with 400- or 600-grit sandpaper after it dries, although this is not required and rarely done.
Related posts
Dropcloths may bunch up and stick to the door paint.If you want to finish a fiberglass door with a fresh coat of paint, you'll have to focus heavily on preparation, or you won't be able to achieve...
Exterior columns on your home can add a touch of elegance. They provide structural support and enhance the overall warmth and texture of your foundation. Like any exterior surface, they require oc...
Paint Over Painted FurnitureA fresh coat of paint can do wonders for old furniture. Give already-painted furnishings a facelift or even a whole new look, just by adding a new coat of paint....
Mastercraft doors are manufactured and distributed by Midwest Manufacturing. The company produces interior and exterior doors. The doors are constructed from steel, fiberglass, vinyl and solid woo...
Exterior raw wood lasts longer if it's painted properly.Exterior raw wood is painted to preserve the wood from the weather. Leaving the wood exposed can cause the wood to warp and discolor. Painti...
