Resurface a front door even during cold weather.
The weather can present a common challenge for exterior painting projects. When the temperature dips below 50 degrees Fahrenheit, many paint products stop adhering properly to exterior surfaces, often making it necessary to suspend a paint project until spring. When you wish to paint a front door in cold weather, you have two options -- remove the door and paint it indoors, or use special exterior paint products formulated for use down to 35 degrees Fahrenheit.
Instructions
1. Prepare the door surface by sanding it evenly with the 220-grit sandpaper. Scuff the entire surface of the door, including front, back and narrow edges, to create a rough surface for the primer. Wipe the door surfaces with the tack cloth to remove sawdust.
2. Monitor the ambient and surface temperatures around the door to determine whether you can paint it while it remains installed in the doorway. Both the air temperature and the temperature of the door surface need to fit within the parameters indicated by the paint manufacturer. Try waiting until late morning to paint to ensure that the door surface temperature rises sufficiently from its overnight temperature.
3. Remove the door from the doorway if the ambient and surface temperatures are below the minimum temperatures recommended by the primer and paint manufacturer. Loosen the pins inside the hinges with the flat screwdriver, slide them out and pull the door out of the doorway. Move the door to an interior room, place it horizontally on two sawhorses and let the door sit in this environment for about 12 hours to allow the surface temperature to rise to within the recommended temperature range.
4. Cover all door hardware, including hinges and the doorknob, with painter's tape.
5. Apply the primer to the door using a 3-inch paintbrush. Keep the primer layer thin and even, covering the narrow edges, on the front and the back of the door. If the door has raised panels, paint carefully with the tips of the brush bristles to spread the paint neatly into these crevices. Allow the primer to dry for the time recommended on the product label.
6. Apply the paint over the primer, using the same application technique. Use vertical strokes with the brush to ensure that the paint looks neat on the door. Allow the paint to dry for the time recommended on the product label. Apply a second coat, if you desire.
7. Remove the painter's tape from around the hardware.
8. Place the door back on its hinges, if applicable.
Related posts
Red front doors stand out.A red front door makes a house seem cheerful and welcoming to passersby, and increases curb appeal for houses listed for sale. As with any painting project, proper prepar...
Paint can take your front door from boring to brilliant.Paint can dress up and bring attention to your front door. The exterior of the front door colors typically range from neutral to bright reds...
It was too cold to paint.Currently there are several paints available to the public that allow painting exterior surfaces in a wide range of temperatures. According to Davis Paint, some oil-based...
Painting a door hinge is easier than it seems.Painting hinges might seem intimidating. After all, how do you let the paint dry without freezing up the hinges forever? As with many home improvement...
Paint a Metal-Clad DoorMetal-clad doors have a different finish than typical metal or wood doors often found on residential homes. You cannot just pick up a brush and paint them with an exterior l...
