Freshly painted brick can give a smooth, even look to the surface.
Old, painted brick often needs a facelift if the paint is peeling, chipping or fading. This is a tricky process because the brick is sensitive to many treatments that usually remove paint. Abrasives like sandblasting and power washers will destroy the brick, and scraping or sanding is impossible. You need to use a particular stripper to get your brick back to original condition and prepare it for new paint. Choose the best supplies for the job for a professional look.
Instructions
1. Vacuum the wall to remove dirt, dust, hair and any loose pieces. Use the upholstery attachment for the vacuum cleaner to get in the hard-to-reach areas.
2. Apply a water-based paint stripper to the wall using a bristle paintbrush. These paint strippers come in gel form and cling to the wall, instead of running down the sides. The stripper will break the bond between the brick and the paint so you can peel it off. This type of stripper takes longer to work so you may have to wait up to 24 hours. Check the paint periodically using a putty knife to see if it is ready to peel off.
3. Peel off the paint using a putty knife to lift the paint up and pull it off. Discard the paint.
4. Apply a second coat of paint stripper if you still have paint on the walls. This is sometimes necessary because the stripper can't always reach deep into the brick's crevices. The type of paint and how much paint was used is also a factor. Apply it as with the first coat. Peel the paint off when ready.
5. Wash the walls with plain water to remove any stripper residue. Consult the package instructions for your paint stripper to see if a neutralizer needs to be applied for that particular stripper. Most water-based strippers only need a water rinse.
6. Allow the brick to dry before proceeding. Brick absorbs a lot of water, so this can take several days in a humid environment. Do not paint over damp brick or it will ruin your paint. Use a dehumidifier or fans to help the brick dry quickly.
7. Apply a primer to the surface with a sponge roller that has a long nap. The fiber on the long nap will absorb the paint and push it into the crevices in the brick. Use a water-based primer designed for use on masonry. This type of primer bonds best to the surface and also protects the paint by sealing in any water or lime that may leach out of the brick. Allow it to cure according to package instructions.
8. Paint the brick in the same way as you applied the primer. Use a long nap sponge roller and a water-based paint. Choose a paint that is compatible with the primer you are using. Wait for the paint to cure and then apply a second coat.
Related posts
Removing paint from bricks reveals the hidden beauty of a brick wall.Some homeowners paint interior brick walls to update the room or to add a decorative touch to the brick. Over time, paint peels...
Painted Brick RowhouseIf you have ever driven through older neighborhoods, where the brick homes date back to the early 1900s, you have seen how beautiful painted brick walls can be. Some people c...
Brick can be painted any color.Outdoor brick walls can be painted with a masonry paint formulated for brick. The paint usually contains acrylic resin, which makes it tackier so it will stick to th...
Painting over a red wall can take a little extra patience.Changing the color of a bright red room can provide a fresh, new look and feel to your home at a relatively inexpensive cost. However, pai...
Sometimes the only area you have available to hang artwork is a brick wall. While you may think it will be too difficult or destructive to hang art and other decorations on brick, it no longer req...
