Wednesday, February 6, 2013

Fresh paint A Vinyl Porch Publish

Painting vinyl porch posts can give a lift to the appearance of your home, but if it's not done right, you could end up with warped or peeling posts, necessitating a complete do-over or even replacement. Prepping the vinyl porch posts before painting is crucial, but choosing the correct kind and even the correct color of paint can be just as important.


Instructions


1. Wash the vinyl porch posts thoroughly with a solution of dishwashing detergent and water. First hose them down to remove dust and cobwebs. Then with a bucket full of water mixed with dishwashing detergent, go to work with the hand brush. Vigorously brush the vinyl porch posts. Start at the top and work your way down. After you've brushed the heavy dirt off, rinse; then with a fresh bucket of soapy water, wash them again with the sponge. Rinse each post when you finish brushing it.


2. Put on your splash goggles and heavy-duty latex gloves and mix a bleach solution with four parts water to one part bleach. Apply this solution to every square inch of the vinyl porch posts you'll paint. It kills mildew and helps to remove or bleach out mildew stains. Let it dry.


3. Use 80- to 120-grit sandpaper to sand the vinyl porch posts. Your goal is not to remove all the paint. You only need to remove the lose bits and rough up the rest of the vinyl.


4. Wash the posts one more time with soapy water. Rinse and let them dry thoroughly.


5. Choose a color of latex paint that is not darker than the original color of the vinyl porch posts. A darker color can cause less of the sun's heat to be reflected on hot days, which may lead to warping.


6. Use painter's tape to mask off parts of the porch, house and eaves that could be accidentally painted when you paint the vinyl porch posts.


7. Use the 4-inch brush to apply the paint. Start at the top of a post and work your way down. Apply enough to cover the surface of the vinyl porch posts, but don't apply so much that the paint runs. Allow it to dry thoroughly. When finished, rinse your brush thoroughly with water.


8. Apply another thin coat of paint when the first coat has thoroughly dried.


9. Remove the painter's tape, being careful not to damage the newly applied latex paint.









Related posts



    Nothing says spring like a fresh coat of pain on your porch. But before you go crazy and start getting out your coveralls and paint rollers, remember that you have to fully remove the paint curren...
    An unsightly porch can make the outside of your home look unattractive. No matter what you do to improve the look of your home, the porch will continue to stand out unless you strip away the old p...
    Water-based (latex) paint technology has vastly improved in recent years, and latex paint adheres beautifully to a wide range of exterior surfaces---in many cases it's better than oil-based paints...
    A T-shirt can be silk screened with an image.A silk screen is a fabric screen with a stencil on it. When various types of ink or paint are pushed through the silk screen, a copy of the stencil is...
    If you have a home decorating budget but have an unsightly 70s vinyl floor in your kitchen, bathroom or other area of your house, don't rush out to replace it. You can paint over the vinyl and cre...