Range hoods are all function, but why shouldn't they be part of the decor as well? There is hope for your old hood. Painting a range hood is a project anyone can do, and it will save you the cost of having to replace it. There are plenty of paint colors to choose from, and if you need something special, your local paint store likely can mix it for you.
Instructions
1. Clean the range hood with warm water and a mild soap with a de-greaser in it. Use a soft sponge and be sure to wash all the areas that will be painted. Any grease or dirt left on the hood will reduce the ability of the paint to adhere to the metal.
2. Use painter's tape and masking paper to mask off any buttons, knobs, trim or other parts of the hood you do not wish to paint. You can get both at your local paint store or home center in the paint department.
3. Sand the surface of the hood with 220-grit sandpaper on a sanding block to remove any loose paint or surface rust. This will also rough up the old paint, helping the new paint adhere to the surface.
4. Wipe down the entire hood with a tack cloth to remove dust from the sanding process. This step is important, because any dust left on the surface of the hood will contaminate the new paint as you spray it.
5. Spray the hood with several thin coats of self-etching metal primer, covering the entire surface. Thin coats will help avoid runs and provide a smoother, more even finish.
6. Allow the primer to dry between coats. Check the directions on the primer you are using for dry times and follow those recommendations. Continue applying coats until the surface is covered and you can no longer see the old color through it.
7. Sand the primed surface lightly with 220-grit sandpaper just enough to knock down any high spots and to rough up the surface of the primer. Don't sand too much, or you will sand right thought the primer and have to start again.
8. Wipe the hood down again with a tack cloth to remove the sanding dust from the primer. You could also use a shop vacuum for hard-to-reach areas.
9. Apply the new paint using long, smooth strokes. Apply it in several thin coats to avoid runs in the paint or high spots and uneven color or shine. Allow the paint to dry between coats. Metal paints tend to dry quickly, but be sure to check the directions on your paint for recommended dry times.
10. Remove the masking and allow the paint to dry for 24 to 48 hours before using the hood.
Related posts
Painting a bookcase is easy. But making it look spectacular can be time-consuming. Fortunately, once done right, the paint job will last a long time. You can use either latex or oil-based paint fo...
Metal is usually a mundane silver color, but what if you want it to match something in your house or garage? You can color metal any color you wish, from a cool blue to a zebra stripe. There are a...
Use a stiff bristle broom to apply liquid sander.Oiled wood siding can present an outdated appearance. One way to freshen up the look of your house is by painting your old siding. Getting paint to...
Aluminum blinds can be painted to match your decor.Window coverings are a major investment in your home. Replacing your blinds because you don't love the color will end up costing you a small fort...
Metal lockers are storage devices that can last a lifetime.Metal lockers are versatile and hard-wearing pieces of storage equipment that can be used for many years in schools, workplaces and other...
